Question 1

What is the plane's bare weight? Dry weight?

Accepted Answer

The bare weight of the airframe is approximately 3.35 KG (7.5lbs). The planes weight with all avionics but no batteries is 4.4kg (9.7lbs).

Question 2

What is the max payload?

Accepted Answer

As stated above, the plane weighs 4.4kg with all avionics but no batteries. Our MTOW is rated to 10KG. So, your maximum payload will depend on your battery needs. If you’re looking for a shorter duration flight (1hr) you’ll need to equip your plane with 1 standard Lithium Polymer battery (8Ah of 6) which weighs 1.1kg. In this configuration your maximum available payload would be 4.5kg.

If you’re in need of increased flight time (> 2Hrs) we suggest upgrading to our custom Lithium Ion batteries. Again, the plane will still weigh 4.4kg with all avionics, but your battery weight will increase

If you wanted to upgrade to our custom Lithium Ion batteries you’re looking at a similar max payload (4.4 kg). Each of these batteries weighs about 1.2 kg and gets you anywhere from 90-120 minutes of flight time depending on your setup.

We of course recommend these batteries given their increased energy density (233 watt hours per kilogram vs 145 watt hours per kilogram), but either setup should suit your missions needs.

Question 3

What are the takeoff and landing requirements?

Accepted Answer

The Albatross was designed to takeoff and land on a variety of surfaces. This includes runways, unpaved roads, grass and dirt. We suggest 200 ft for both takeoff and landing.

Question 4

Will my sensor fit inside the payload bay?

Accepted Answer

We designed our payload bay to have an enormous amount of space and slot all avionics under the center wing to keep the bay clear for sensors, gimbals, etc.

Question 5

Is the Albatross waterproof?

Accepted Answer

While the Albatross is not inherently waterproof rain can certainly be overcome and we've already worked with a handful of customers to tackle this challenge. In these instances, we've used waterproof sensors, sealed up all open areas with rubber lips and removed all external electrical components. Also, all antennas are covered and the power system is amended is needed. Please contact us for pricing.

FAQ

What is the plane's bare weight? Dry weight?

What is the max payload?

What are the takeoff and landing requirements?

Will my sensor fit inside the payload bay?

Is the Albatross waterproof?

Need more help?

Build The Right UAV
Solution For Your
Missionuy

Join our mailing list

Menu

Follow us on

LEGAL

FAQ

What is the plane's bare weight? Dry weight?

What is the max payload?

What are the takeoff and landing requirements?

Will my sensor fit inside the payload bay?

Is the Albatross waterproof?

Need more help?

Build The Right UAV Solution For Your Missionuy

Join our mailing list

Menu

Follow us on

LEGAL

Build The Right UAV
Solution For Your
Missionuy